| |
 |
HACH sc1000 Display Module, Multi-Parameter Universal Controller
Modular System-The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately.
Display Module-The sc1000 Display Module is a full-featured controller with a large color touch-screen display. The intuitive, easy to use interface can be used for any number of parameters. One Display Module controls either a single Probe Module or a number of Probe Modules connected by a digital network. The Display Module is fully portable and can be disconnected and moved anywhere within the network. The Display Module must be ordered separately from the Probe Module.
Probe Module-Each sc1000 Probe Module provides power to the system and can accept up to 8 digital sensors. Probe Modules can be networked together to accommodate many more sensors attached to the same network. Only one Display Module is needed for a networked system. The Display Module must be ordered separately from the Probe Module.
"Plug and Play" Operation
There´s no complicated wiring or set up procedures with the sc1000 controller. Just plug the sensor into a Probe Module and it´s ready for use without special ordering or software configuration.
Mix and Match Digital Sensors
The digital sensors that can be plugged into the Probe Module can be any from Hach´s line of digital sensors-dissolved oxygen, pH, ORP, conductivity, turbidity, suspended solids, nitrate, etc. Use them in any combination.
|
| |
 |
Ohmart Vega FIBERFLEX Level Detectors
Patented, Flexible, Non-Contact Level Monitor
The LFXG FiberFlex® is the industry’s only flexible radiation level detector and features Ohmart/VEGA’s GEN2000® family of electronics: the most advanced electronics in the industry. With its patented fiber-optic scintillator bundle, the FiberFlex® has significant advantages over both solid scintillators and traditional ion chamber detectors.
Well suited for a wide variety of continuous level measurements including curved vessels and sumps.
Features
- Longest/lightest detector available in the industry
- High-sensitivity for retrofit use with older sources
- Powerful GEN2000 electronics permits a wide range of setup and compensation options
- Key Specifications
- Available in lengths from 12 in to 23 ft (300 mm to 7 m)
- Weight from 16 to 40 lb (7.3 to 18.1 kg)
- 4-20 mA HART®, Foundation Fieldbus®, or frequency outputs available
- Universal input power: 90-250 VAC, 50-60 Hz; 20-60 VDC
|
| |
 |
Ohmart Vega Vegapuls 68
For Bulk Solids Level Measurements
The VEGAPULS 68 uses electronics with increased sensitivity to achieve a strong return signal from solid materials. It is able to detect and evaluate echoes in low dielectric conditions at long ranges. It is available with a unique swivel antenna which allows for mounting to match the angle of repose created by fill or empty conditions.
The VEGAPULS 68 focuses microwave energy down to the measurement surface by using a metal horn antenna, or for very long measurements, a parabolic dish type antenna.
Features
- 26 GHz high-frequency radar
- Loop-powered
- Unaffected by dust generation and pneumatic filling
- Adjustment with PLICSCOM, HART® handheld or PC
- Key Specifications
- -40° to 392°F (-40° to 200°C) operating temperature
- -14.5 to 580 psi (-1 to 40 bar) operating pressure
- +/- 15 mm (0.59") accuracy
- 230 ft (70 m) measuring range
|
Accutech - Wireless Instrumentation
The new industrial revolution.
You've encountered this challenge, over and over
- the time and the expense of running wires makes it difficult to measure
parameters that have an economic impact on your plant operation. If only you could
gather process information quickly and easily, you know the savings you could
achieve!
The solution?
Wireless Instrumentation
Developed by Accutech, a division of Adaptive Instruments,
LLC, these robust products are truly wireless. And, right out of the box, they
perform in harsh - even hazardous - industrial environments.
- For long term monitoring of variables in remote
locations
- For short term data gathering on process conditions
- For new installations, to test a project's economic
viability
The implementation
No wires. No permits. No licenses. Configure, start-up and test in the shop. Install
in the field.
Wireless Data Network
Your field units communicate in a secure, digital protocol over a band of frequencies
from 902 MHz to 928 MHz. This data communication technique has been the backbone
of the military's secure communications protocols for many years. It requires
no FCC site license. The multiple frequency transmissions, send-receive acknowledgements
and built-in data redundancy have proven to be extremely robust.
Update Speed
Update speed is user-settable to match the needs of the application. The "Smart-Update"
capability immediately initiates a message when a fault is detected. Otherwise
a "Healthy Heartbeat" communication is initiated with the base radio
on a regular interval to pass status and any new configuration information.
Range
Range up to 3,000 feet with omni-directional antenna. Other options are available
to increase range.
Battery Life
Generally 5 years with factory default update speed and communication parameters.
Detailed Brochure
Fluke 718Ex Intrinsically Safe Pressure Calibrator
 |
- ATEX II
1G EEx ia IIC T4 Compliant.
- Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve.
- Pressure measurement to 0.05% of full span, using an internal pressure sensor.
- Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules.
- Wide range of selectable measurement units for pressure.
- Current measurement with 0.02% accuracy and 0.001 mA resolution.
- Pressure switch test function.
- Min-Max Hold functions.
- Compact size and weight.
- Simple, push-button user interface.
- Rugged and reliable, ideal for field use.
More Info
|
|
|
|